• #
  • #
  • #
  • #
  • #
Pusat berita
  • Plastic Injection Mould Design Consideration
    Plastic Injection Mould Design Consideration

    Plastic parts is widely used in many industries, so plastic injection mold is very important for plastic parts production, how to design perfect injection mold? In the fact, there are many design considerations in injection mold designing, so we will share some details as below.   Draft: Required in both the core and cavity for easy ejection of the finished component Shrinkage allowance: Depends on shrinkage property of material core and cavity size Cooling circuit: In order to reduce the cycle time, water circulates through holes drilled in both the core and cavity plates. Ejection gap: The gap between the ejector plate face and core back plate face should hold dimension within the core. It must allow component to be fully removed from the mold. Air vents: Removes gases entrapped between core and cavity (usually less than 0.05 mm gap), because excessive gaps can result in flash defects. Mold polishing: The core, cavity, runner and sprue should have good surface finish and should be polished along material flow direction. Mold filling: The gate should be placed such that the component is filled from the thicker section to thinner section.   PTMS as one of china plastic injection moulders, we have much experience in custom plastic injection mold making and injection molding, also can design perfect injection mold for the customers, if you need high quality plastic moulds, please contact us, for more details visit our website ptms-mold.com, project RFQ to sales@ptms-mold.com. We will make better injection mold solution for you!

  • The Construction of Injection Mould
    The Construction of Injection Mould

    PTMS as an professional china plastic injection mold company, we have much experience in plastic injection mold making, always provide high quality custom plastic injection mold to the worldwide customers. Many people know injection mold but do not know what is injection mold construction, so we will discuss the plastic injection mold construction with you. Injection mold construction is the process of creating molds that are used to perform injection molding operations using an injection molding machine. These are generally used to produce plastic parts using a core and a cavity. Molds are designed as two-plate or three-plate molds, depending on the type of component to be manufactured. The two plate mold requires a single day in light, while the three plate mold requires two days. Mold construction depends on the shape of the component, which determines the parting line selection, runner and gate selection and component ejection system selection. The mold base size depends on component size and number of cavities to be planned per mold. If you need to know more details of injection mold construction, please visit our website ptms-mold.com, projects RFQ please send it to sales@ptms-mold.com. We would like to share more and more injection mold construction details to the worldwide people.

  • How to Quote Plastic Injection Molds Cost?
    How to Quote Plastic Injection Molds Cost?

    Our life is more and more comfortable, many products with plastic parts in our society, in the fact, plastic parts is made by plastic injection molds and it also called plastic injection molding parts in injection mold industry.   We can ask somebody for the products’ price, but do you know the plastic injection mold cos? How to calculate one injection mold cost? PTMS as an professional plastic injection mold company in china, we have much experience in plastic injection mold making, always provide high quality custom plastic injection mold to the worldwide customers, so we always quote the reasonable injection mold cost to our customers.   The determining factors in the cost of your mold are a combination of the part size, complexity, material, and anticipated quantities. For instance, if you wanted 1,000 washers per year, we would recommend a single cavity mold, meaning it makes one washer per machine cycle. In that case the mold would probably be $1,000-2,000. On the other hand, if you are going to need 100,000 box controllers every month, we would build a 12 cavity hardened “family” mold which made four Fronts, four Backs, and four Button Trees every cycle, and you’d better have $60-$80,000 or more to invest.   If you want to know more injection mold details, please visit our website ptms-mold.com, we will share more and more useful knowledge to you.

  • What Products are Made from Injection Molding?
    What Products are Made from Injection Molding?

    Many plastic parts used in many products, so plastic parts is very popular, but nobody know how the plastic parts produce, in the fact, the plastic parts is made by plastic injection mold, the plastic parts is also called plastic injection molding or injection molding.   Injection moulding is used to create many things such as wire spools, packaging, bottle caps, automotive parts and components, pocket combs, some musical instruments (and parts of them), one-piece chairs and small tables, storage containers, mechanical parts (including gears), and most other plastic products.   PTMS is a china plastic injection mold company, we can make top quality plastic moulds as customers’ drawings or design, also we are china injection molding undercut manufacturer, for more details please visit web ptms-mold.com. We would like to share more and more injection molding knowledge with the worldwide people.

injection molding plastik dengan melukis untuk basis produk elektronik dan penutup
  • Merek:

  • Pembayaran:

  • Asal produk:

  • Warna:

  • Pelabuhan pengiriman:

    Shenzhen, China
  • Waktu pimpin:

    5-7 weeks
Hubungi sekarang
Detail produk

injection molding plastik dengan melukis untuk basis produk elektronik dan penutup

itu bagian cetak dasar elektronik terbuat dari injection molding , cetakannya memiliki banyak slider dan cetakan injeksi plastik presisi dan presisi tinggi, kami juga bisa berproduksi injection electronic cover molding, electronic cover parts injection molding dan sebagainya.

perusahaan kami mengkhususkan diri dalam cetakan injeksi plastik custom dan bagian injection molding presisi layanan. jika Anda memerlukan cetakan injeksi khusus atau bagian cetak injeksi plastik , silahkan kirim sampel atau data 2d / 3d untuk cek, kami akan mempelajari data dan mengirimkan cetakan injeksi atau contoh cetakan injeksi dan analisis teknologi untuk referensi.

aplikasi cetak injeksi plastik kustom:

bagian cetak injeksi plastik untuk arsitektur bagian

hal Komponen injeksi otomatis injeksi terakhirplastic injection molding machine

injeksi dibentuk produk utilitas rumah tangga

selungkup elektronik plastik

cetakan plastik untuk medis & produk gigi

bagian cetak injeksi untuk toko model, mainan

bagian plastik injeksi untuk desain produk baru & pengembangan

bagian plastik khusus untuk konstruksi

cetakan injeksi yang disesuaikan untuk suku cadang militer

injeksi plastik untuk teknologi informasi

bagian plastik cetakan untuk sistem pembayaran

bagian plastik presisi untuk peralatan pertanian

Bagian plastik injeksi untuk orang lain seperti kosmetik

deskripsi produk plastik:

material plastik : nilon, nylon + gf, pc / abs, pbt + gf, pp, pom, pmma & etc

Desain perangkat lunak 3d : kerja keras, nx, pro-e, auto-cad (nx, master cam) untuk perangkat lunak cam

cetakan aplikasi : Sebuah utomotive, elektronik, industri, arsitektural, medis, dll

tipe produk : presisi mol d ing arsitektur bagian-bagian yang terbuat dari plastik

rongga cetakan : rongga tunggal, multi rongga

pelari panas : moldmasters, yudo, hasco, dme, incoe, synventive

standar cetakan : hasco, dme , lkm

hidup cetakan : 300.000-3.000.000 tembakan (sesuai dengan jumlah Anda)

mesin cetak : 20 set mesin cetak injeksi otomatis

layanan utama kami:

cetakan injeksi plastik & masukkan cetakanauto injection molding machine

s cetakan rongga & m ulti-rongga cetakan & produk

plastik di atas cetakan cetakan & cetakan injeksi warna ganda

cetakan keluarga perkakas & produk

hot runner mold tooling & produk

perkakas perakitan dan perakitan produk

operasi sekunder

perkakas prototyping cepat & produksi produk

langkah proses:

kutipan : kami akan mengirim pelanggan laporan jika produk plastik tidak bisa dibuat oleh cetakan

perundingan : cetakan & bahan plastik, nomor rongga, syarat pembayaran, dll

pesanan pembelian : kirimkan pesanan pembelian kami dan lakukan depositnya

desain cetakan : kami akan mengirim pelanggan s cetakan desain untuk persetujuan untuk pertama kalinya

m pembuatan lama : mulai perkakas plastik setelah persetujuan desain bagian plastik 3d

pengolahan cetakan : kirim laporan ke pelanggan setiap minggunya

uji coba cetakan : kirim sampel percobaan plastik dan coba keluar laporan ke pelanggan untuk pengujian

produksi : membuat produksi bagian plastik setelah persetujuan sampel percobaan

pengiriman : pak bagian plastik setelah qa cek sebelum pengiriman

terima kasih banyak untuk browsing halaman produk kami, silahkan kirim kami rfq untuk sales@ptms-mold.com Jika Anda membutuhkan layanan kami, kami akan mencoba yang terbaik untuk memberi nilai bagi Anda!


1. lebih banyak produk cetakan injeksi plastik, silakan lihat http://www.ptms-mold.com/plastic-injection-mold_c4

2. lebih banyak produk cetakan injeksi plastik, silahkan lihat http://www.ptms-mold.com/plastic-injection-molding-parts_c5

3. lebih banyak produk injection molding ganda, silahkan lihat http://www.ptms-mold.com/double-injection-molding_c6

4. lebih banyak produk komponen kompresi karet silikon, silakan lihat http://www.ptms-mold.com/silicone-rubber-compression-molding_c7

5. lebih banyak produk casting, silahkan lihat http://www.ptms-mold.com/casting_c8

6. cetakan injeksi lebih banyak, injection molding, produk pengecoran, silahkan lihat http://www.ptms-mold.com/products

7. pelajari lebih lanjut tentang ptms, silakan lihat http://www.ptms-mold.com/

Hak cipta © 2002-2018 PTMS COMPANY LIMITED